It had been quite a few days I have been searching for some knives that are specially made for specific work. Recently I posted a status on my social media profile asking for a knife specially made for bushcrafting.
During a recent survival act, I found the necessity of knife that would help me with bushcraft work. However, I opt out to think all by myself and searched for help. The idea resulted in a good way and I had many names by the end.
In addition, in many names, I had seen one name in the suggestion box almost every five to six minutes. Without going any further I ordered Benchmade 162 Bushcrafter knife online as I was done suffering.
Most of my adventure trips, things that I like the most is bushcrafting. I find is somehow easy and fascinating. Later I got the same suggestion from my military buddies as they use it too. It has been said earlier that this is specially made for bushcrafting which means getting maximum help with minimal supplies.
Let’s take a look at the following features that this special knife hold.
The Exclusive Features of Benchmade 162 Bushcrafter knife
The wellspring of the word begins from capacities used as a piece of the bush country of Australia and South Africa and returns no not as much as a couple of hundred years.
Today, it’s consistently associated with a different course of action of survival techniques including current wild fundamental senses, rough instrument making with ordinary materials, and the use of present-day gadgets like sharp edges and tomahawks.
The actual point of bushcrafting is basically the capacity to get by, as well as flourish off the land. This implies having the capacity to live with just the materials you find in the wild and some straightforward devices, more often than not a hatchet, a blade and devices that you can make yourself.
Bushcraft truly requires a substitute sort of forefront, one that can hold up under the persisting use and abuse it will keep an eye out in the field. Over the traverse of the most recent couple of years, distinctive affiliations have begun propelling given bushcrafting cutting edges, in any case to the degree I can tell, a great deal of them were Bushcraft slices in name as it were.
The Materials of The Blade
The appreciable fact about the Benchmade Bushcrafter 162 knife is that it is basically USA made. The blade has an amazing hardness of the Rockwell Scale 58-60 HRC.
The knife weighs 7.72 ounces with an overall length of 9.2 inches. In addition, the thickness of the blade is .164 inches along with a 4.4 inches cutting edge. The edge is made with super tough S30V full tang steel, which has a get pulverize and leaves the box amazingly sharp and is been called as “high-ground inclined edge front line”.
Benchmade’s first strike into the Bushcraft world has been made by the162 Bushcraft Knife. It has basically a settled sharp edge cut that is a decent old designed workhorse and an unequivocal positive growth to the framework. You can truly give a fair outdated beating to this sharp edge without battling with harming it.
This blade has turned into my most loved from the day I purchased this. As it has been specified as of now this is extraordinary to bushcrafting and I have a significant learning with respect to this field.
I discover this Benchmade Bushcrafter 162 knife a significant bit of work as it helped me amid my experience travel. The sharpness is striking. This is such a blade, to the point that can be last for numerous ages.
The blade has a sloping edge on the best in the event that you see you will see the pleasant smooth bend along the base with a thick steel.
Not to brag but you can even shave your nails with this Benchmade Bushcrafter 162 . This knife came super sharp out of the box. In addition, you can even make feather sticks with dried grass is this knife cuts really well and precisely.
The Benchmade Bushcrafter 162 knife will give you a nice grip. Point to be noted that bushcraft is no easy work, it takes a lot of strength and hard work to make something meaningful out of scratch.
If you are in a jungle in the process of doing bushcraft then keep in your mind that the knife ought to be sharp. Otherwise, you will fail in making something every time you try. In addition, this knife is capable of doing the work as you will be fascinated by its grip.
Moreover, the knife has a thick blade and strong tip which may help you to cut risky stuff such as cans or anything related to tin.
The full tang construction has made the knife super strong which will even help you batoning. This knife also has 90-degree angle on the edges to allow one to strike a flint rod or a mission metal rod or maybe magnesium striker.
The snap retention strap sheath of Bushcrafter 162 knife is brushed full grinned buckskinned leather and it does have a D ring up in the top which basically gives you the option to buy another fabric or belt to tie it with. Moreover, this knife also has a clip to keep the knife in the sheath.
The sheath also has a loop where you can run a fire steel. Although you might want to check before buying the knife if the fire steel has enough space. The knife fits nicely in the sheath also stays in place.
On the back of the sheath, there is a belt loop and on the handle of this, it sticks pretty far out of the sheath. Point to be noted that, if you use the belt loop, the handle of the knife is going to stick pretty high up on your hip, although I don’t personally find it comfortable.
Handle & Ergonomics
The blade has decent scales on it made out of G10 polymer material. This G10 material is incredible as it doesn’t retain water, in this manner, it doesn’t get wet. Be that as it may, the handle additionally has little furrows in it where its ground to give you a decent buy on the handle.
The grommets of this Benchmade Bushcrafter 162 blade are made of titanium and those hole in the scales and after that, there is likewise a little opening or grommet for the cord.
The knife itself is just truly beautiful coming out of the box.
Benchmade 162 Bushcrafter Overall Review
To be honest, I really like this knife. This knife gives me good hold. Has an amazing cutting edges which is basically the very polymer G10 polymer material. The handle is so much comfortable that you can even have the comfortable holding it as it doesn’t get wet in water.
I personally love the batoning with this knife as it helps to provide an eminent grip. Moreover, I find the D ring quite magnificent. As it has been said earlier that the handle of the knife may stick pretty high up on your hip then use that D ring and maybe tie a leather cloth or a band in order to attach it with your pant.
Pros and Cons
The pros and cons are given below.
- The blade has decent scales on it made out of G10 polymer material.
- This G10 material is incredible as it doesn’t retain watertherefore, it doesn’t get wet.
- The blade has an amazing hardness of the Rockwell Scale 58-60 HRC.
- The knife has thick blade and strong tip.
- The sheath also has a loop where you can run a fire steel.
- This knife also has a clip to keep the knife in the sheath.
- The fire steel might have narrow space.
- the knife may stick pretty high up on your hip, therefore use the D ring to tie with another belt.
Frequently Asked Questions (FAQs)
A: Yes, it is a full tang constructed knife.
A: Yes, apart from discounted Red Class knife, all the knives manufactured by Benchmade are made in USA.
A: No, this knife does not come with a fire striker.