I remember, last time the knife that I used from ‘American Lawman’ by the cold steel. Well, there is no need to mention the credibility of cold steel and how fine knife they make. I like the knife with exclusive features.
Well, to be honest, I have always been a fan of fixed blade knives. I kind of think they are easy to handle and moreover, easier to use. however, for the last couple of months, I have been using a lot of folding knives.
Even recently I bought a Kershaw Chill 3410 Knife and I loved the folding blade. Let me tell you, I bought this Recon 1 out of love for folding knives. I was almost sure about one thing that cold steel’s knives won’t let me down.
If you are looking for rough and ready kind of utility knife or an inexpensive tactical folder this is the knife to consider I think. So, without any further delay,
let me enlighten you with this amazing piece, Cold Steel Recon 1 knife by my favorite cold steel.
Exclusive Features of Cold Steel Recon 1
Spearpoint blade design.
Stainless steel blade.
Tri-Ad Lock system.
Materials of The Blade
Give me a chance to clear up something before all of you get confound a little as for cause you may have been seeing relatively comparable sort of blades however with various sharp edges, which is on the grounds that there are three sorts of cold steel cutting edge under a similar name which is Recon 1.
Be that as it may, according to the edge structure by Cold Steel cut these blades fundamentally accompany relatively same lengths and these are pear point, cut point cutting edge style and tanto edge.
Presently we should discuss the genuine Taiwan made blade which I’ll be exploring here at this point. This Recon 1 cut has a general length of 9.38 inches including a cutting edge length of 4 inches. The cutting edge thickness is 0.13 crawls with a lance point sharp edge structure. This blade weighs 5.3 ounces.
The cutting edge steel of this every day (EDC) knife is AU-8A which contains an empty granulate with a plane edges. I like this strategic blade excessively. Exceptionally the edge with a stunning edge with which you can undoubtedly curve onto something.
The cutting edge of this blade is riding on the bronze washers which is great and to see simple to think about and keep up. It is essentially DLC covered (precious stone like carbon) CTS-XHP which is new craftsman ability that they use in over their range.
The Cold Steel company likewise produce the blade with an assortment distinctive sharp edges here and there it accompanies creamer plane edge or possibly completely serrated. Cold steel is great at giving you a sharp blade out of the case.
Things being what they are, I attempted some essential sharpness test on a paper, and prepare to have your mind blown. It cuts super smooth and slick. This ‘Recon one’ has extremely decent and high starting sharpness in spite of the fact that it presumably won’t give you a well sharpened sharp cut yet at the same time it’s entirely cool blade.
On the off chance that you look close you’ll see some jimping quite the G10 scales on the back. Along these lines, when you do hold it up as you’ll see it is pleasantly formed in you will get an ideal fit in your grasp.
It doesn’t make a difference whether you are right or left-handed, you will have the capacity to get a decent hang on the blade. Despite the fact that, try to keep your hat on the off chance that you need, you have the choice accessible to change the thumb stand on the off chance that you are not sufficiently happy.
To be completely honest here, the surface of the handle feels like a brickwork design, you will have the capacity to get an astonishing hold on it.
In the event that you think the edge isn’t sufficient sharp for you to deal with then you can do some testing for instance, on the off chance that you take a bit of meat and test it out you’ll get the outcomes.
Handle, Ergonomics & Pocket Clip
The handle of ‘Recon one’ is outstandingly finely finished and grippy and framed G10 scales stash cut. The handle goes with different tones, with the objective that you can pick as indicated by your shading tendencies.
What’s more, the pocket clip is genuinely reversible from side to side. This edge is a tip-up pass on any way you could have a left-hand pass on the separation and it goes with an extra catch over the bud of the handle.
Frankly, the handle is extremely smooth and there isn’t metal roller framework in here, yet they have cleaned within the empty piece of the handle, without a doubt, they truly got it pleasant and smooth.
In the event that you are as yet stressing over the convey choices, brace yourself for what I’m about to tell you, this blade accompanies two diverse clasp office, so on the off chance that you are left-given, there is nothing to stress over. The handle has a cord gap on it, with the goal that you can utilize it appropriately.
Tri-Ad Lock System
The everyday carry (EDC) ‘Recon one’ knife is a manual activity back bolt, and it uses cold steel’s patented restrictive structure called the Tri-Ad bolt. The deployment is accomplished with the ambidextrous thumb studs that are in fact removable.
Let me tell you about Tri-Ad lock and why everyone talks about it? So, the Tri-Ad lock is a super strong lock. Also, selling knives as long as we have on some of the locks I have noticed that a little bit more difficult to depress. But these locks actually feel so smooth.
The main thing with the Tri-Ad lock is to fully depress it all the way before you try to unlock the blade. So, you won’t be regretting using this knife.
Overall Review of Recon 1
I personally think this knife is super cool, especially with the Tri-Ad lock and spear point. Although, I haven’t used the tanto blade yet, really looking forward to it.
Before, writing this review, I actually tried this knife on a piece of meat as I mentioned earlier. In addition, the result came it so good. I was able to cut the meat with accuracy, by which I mean it was sharp enough.
This knife is perfectly suitable for everyday carry (EDC) purpose and also self-defense. I would suggest, if you really looking forward to buying a good knife then knife Recon 1 by cold steel can be a fine choice.
Last but not least, I became a super fan of this Tri-Ad clock system as it is super strong and you can get a good hold on the knife. Moreover, the thumb stud is just another feature for you to go wow, just how I went.
Pros and Cons
Here are the pros and cons for your better understanding.
Suitable for both right and left-handed person
Super strong Tri-Ad lock
Easily reversible pocket clip
Ambidextrous thumb studs
A bit expensive
Frequently Asked Questions (FAQs)
Q: Is it a USA or China made?
A: This Knife is actually made in Taiwan.
Q: What about the lock? Is it made with spring?
A: No, the lock system is the Cold Steel patented Tri-Ad system which is super strong and the knife opens easily.
Q: What is the color of the blade?
A: The blade has a black coating on it.